feedback 18

Use the comment section below to leave feedback for the features of this site or on any of the forms here you have completed. Please use the following format:

Time you visited the site.
Feature in question.
What you expected to happen.
What you think actually happened.
What can we do to improve your experience?
What positive experience have you had with the site?

Leave a Comment

Your email address will not be published. Required fields are marked *


18 thoughts on “feedback

  • Reece Love

    Dear 10BitWorks,

    My name is Reece Love, and I am a member of the Dallas Makerspace here in North Texas.

    I am contacting you and the other Makerspaces around the world because I am part of a very important project that will be of interest to your membership.
    Our site,, is about to release our beta version whose intent is to help makers, tinkerers, and entrepreneurs find, recruit, and create business partnerships to help manifest their projects. We are offering the service 100% free of charge.

    We ask for your support by going to and joining our mailing list at the bottom of the home page. This will help ensure that you will be informed the minute Ventrifuge is ready to start helping makers!

    We also request that you mention us on your membership forum so that your members may join our mailing list as well. In addition, we would like to have permission to trade backlinks in your directory.

    Thank you very much for your time and consideration. If you have questions, please feel free to contact me personally.
    Reece Love

  • Michael Una

    Hi 10bit folks, how’s it going?

    The gang here at Inventables is working on an outreach program to get open-source CNC milling into every makerspace in the US and I thought you cats might be interested. The basics of the program are this:

    We get your space set up with a Shapeoko, or if you’ve already got one, we give you the whole upgrade kit plus early access to Easel. We also send a 20-pack of our bottle opener pieces, Inventables T-shirts, and an inspirational CNC projects book. We then work with you to organize a demo night where folks get to set up their own Easel account, then do the bottle opener demo so they understand how to use Easel. The general idea here, and the whole reason we made Easel, is to give absolute newbies an easy starting point to learning CNC milling.

    In return, we ask that you hang a little banner over the Shapeoko and don’t disassemble it for other projects. We would also ask that you occasionally give us feedback on Easel as we roll out new features and promote & blog about the demo event on the makerspace’s website and social media. That’s pretty much it. If you guys are planning on going to the big Maker Faires, I’m working on organizing a special VIP party for our makerspace friends and you guys would be invited to those.

    The basic impetus here is that most maker spaces have a 3D printer for people to use but not a CNC mill, and we want to fix that. Because in my opinion, if you actually want to make real stuff CNC milling is where its at.

    So, talk that over with your board and let me know. I’m trying to give away 50 Shapeokos here, so help me out?

    Michael Una

  • Tray Sorensen


    I am Tray Sorensen with Arc Robotics, I believe by combining Maker’s imaginations with the right tools and equipment, we can change the world.

    We are excited to be launching a new Kickstarter that we believe will greatly help you and your fellow Makers. It is an Arduino Motor shield that can supply two DC motors with 43 Amps of continuous current and do much more. There are many projects out there that would greatly benefit from this ability. You can check out our Kickstarter page here:
    We would greatly appreciate it if you could look over what we have and share it with your fellow Makers.

    Thank you for your time and support.

    Tray Sorensen

  • Evan

    Hey there,

    My name’s Evan Jones and I’m the community manager for Pursuitery. We’re into what you’re doing, and we’re big fans of Makerspaces, so I wanted to reach out and say “hi.” I also wanted to let you know that we’re hosting a free virtual Minecraft camp called, oddly enough, Camp Minecraft. We wanted to see if you wanted to come play Minecraft with us sometime.

    We’d like to invite you, your community, and your friends to join our server. You can sign up at , and we’ll whitelist you after 24 hours so that you can dig until your heart is content.

    With that said, feel free to add me to your mailing list and let me know what you’re up to. Keep making!

    Thank you,


  • Andres

    First visit today and it was pretty sweet. I met a bunch of cool guys and really liked the projects that were being worked on. I will be looking forward to seeing more things in the future.

  • Jack

    Would love to see what y’all have in terms of equipment / amenities / space. A list with pictures would be great!

  • Linda Downs

    We would like to invite you to our Call for Makers for our Mini Maker Faire to be held May 23, 2015 in Floresville, TX. You may email me for more information or visit our webpage ( to sign up. You can also follow us on Twitter @WCPLMakerFaire.

    Looking forward to hearing from you.

    Linda Downs

  • Craig Clingan

    I’d like to find out more about this place. Is it okay to stop by tomorrow? Is there a good time? Thanks

  • montana

    Very excited about this! Good thing I read the Lavaca Neighborhood website today!

    Is it possible to drop in on an afternoon. ..Prob not till after fiesta as Cornyation will be taking up my extra time till then!

    Awesome idea!


  • Emmy Yin

    Hi there,
    ITEAD Studio is an open source hardware manufacturer and supplier. We provide Arduino compatible boards, shields, RPI add-ons, etc., as well as PCB service, PCBA service, and custom design service. Established in Shenzhen, a city renowned for its thriving electronics market, we have a perfect supply chain to provide competitive products.

    We are now looking for new distributors. Be our distributor, you may get the discount UP TO 40% off. Please contact for more information.

    We recently launched a campaign on Indiegogo. In the beginning 3 days, we have already raised $23406 by 1032 people. See

    Nextion is a cost-effective Human Machine Interface (HMI) that can reduce the GUI development difficulty and shorten the development cycle. It’s suitable for both B2B and B2C market.

    Would you please give us a hand to help our project become more widespread? Just share this project on your social network. Thank you in advance.

    ITEAD Studio

  • sdig

    “What can we do to improve your experience?”

    well, a hummer from a supermodel would be nice


    It gets difficult for newcomers to decide where to begin. If you’re
    new to gamble, the vast gambling world online might perplex you.
    But, once you take the plunge, you’d be surprised to find out that it’s not as complex as it seems
    to be.